stresses

The micrometer method for measuring deformations and loads in bar elements has proved to be effective not only in laboratory tests, but also in field tests on a real construction site.
UDC: 69.058.2
DOI: 10.23968/1999-5571-2021-18-3-71-75
Способ измерения деформаций и усилий в стержневых элементах с применением микрометра доказал свою эффективность не только в рамках лабораторных испытаний, но и в процессе полевых испытаний на реальной
UDC: 69.058.2
DOI: 10.23968/1999-5571-2021-18-3-71-75
Приводится практический расчет внецентренно сжатого трубобетона на основе нелинейной деформационной модели с учетом нормативных диаграмм деформирования материалов.
UDC: 539.4
DOI: 10.23968/1999-5571-2021-18-1-36-45
The article provides an example of practical calculation of eccentrically compressed steel tube confined concrete using a nonlinear deformation model taking into account the standard deformation diagr
UDC: 539.4
DOI: 10.23968/1999-5571-2021-18-1-36-45
The article is devoted to the practical calculation of the bent elements strength made on the basis of a nonlinear deformation model, taking into account the experimental deformation diagrams of mater
UDC: 624.072.221
DOI: 10.23968/1999-5571-2018-15-5-58-67
Рассмотрен практический расчет прочности изгибаемых элементов, выполненный на основе нелинейной деформационной модели с учетом опытных диаграмм деформирования материалов.
UDC: 624.072.221
DOI: 10.23968/1999-5571-2018-15-5-58-67
The article deals with the impact of new construction development on the existing buildings.
UDC: 539.3
DOI: 10.23968/1999-5571-2018-15-2-93-99
The article presents the results of model stamp tests on the study of the nature of two types of reinforced foundation pads under load.
UDC: 692.115
Представлены результаты модельных штамповых испытаний по исследованию характера работы двух типов армированных фундаментных подушек под нагрузкой.
UDC: 692.115
Подписка на stresses