numerical modeling

При проведении натурных экспериментов по моделированию воздействия волны цунами на гидротехническое сооружение, выполненных в определенном масштабе, физическая модель не позволяет определить перемещен
UDC: 626.01
DOI: 10.23968/1999-5571-2023-20-5-37-45
When carrying out full-scale experiments on modeling the impact of a tsunami wave on a hydraulic structure, the physical model allows determining neither the displacement and stresses in individual el
UDC: 626.01
DOI: 10.23968/1999-5571-2023-20-5-37-45
Проанализирована возможность использования аналитического метода прогноза несущей способности свай в билинейной постановке для свай заводского изготовления.
UDC: 624.154
DOI: 10.23968/1999-5571-2023-20-1-46-56
To date, there are available numerous experimental data that have provided the basis for the derivation of equations linking the parameters of the collapsed boron wave (tsunami) and the total horizont
UDC: 626.01
DOI: 10.23968/1999-5571-2023-20-1-15-21
The article analyzes the possibility of using the analytical method for forecasting the bearing capacity of piles in a bilinear formulation for prefabricated piles.
UDC: 624.154
DOI: 10.23968/1999-5571-2023-20-1-46-56
Аt present, there is observed a need to model natural processes in order to clarify the impacts caused by them.
UDC: 532.5
DOI: 10.23968/1999-5571-2022-19-1-24-28
На сегодняшний день существует необходимость моделирования природных процессов с целью уточнения вызываемых ими воздействий.
UDC: 532.5
DOI: 10.23968/1999-5571-2022-19-1-24-28
Приводится пример вариантного проектирования мероприятий по инженерной защите участка автомобильной дороги от склоновых процессов.
UDC: 624.9
DOI: 10.23968/1999-5571-2018-15-2-100-105
The article gives an example of alternative design of measures on engineering protection of the motor road section against possible landslide processes.
UDC: 624.9
DOI: 10.23968/1999-5571-2018-15-2-100-105
The paper presents an analysis of advantages and disadvantages of the trench «wall in the ground» (diaphragm wall) used in construction industry.
UDC: 624.159
DOI: 10.23968/1999-5571-2018-15-1-68-74

Страницы

Подписка на numerical modeling