Review article

Protective composites based on an epoxy oligomer modified with 2d graphene for heavy hydraulic concrete

UDC: 

691:699.8

DOI: 

10.23968/1999-5571-2024-21-4-62-69

Pages: 

62-69

Annotation: 

The paper presents the results of study of the properties of protective polymer composites based on Ed-20 epoxy resin with the addition of 2d-graphene carbon nanomodifier and triethylenetetramine hardener. Characteristics of protective polymer composites were studied, namely, the effect of the 2d graphene modifier on the viscosity of the epoxy oligomer and on the impact strength of the cured coating. There was investigated the effect of coatings on the performance of 2 compositions of heavy concrete differing in density. The positive effect of epoxy protective coatings on water absorption, frost resistance and compressive strength of heavy cement concretes is shown. 2d-graphene 2d graphene modified epoxy composites have been shown to be more effective than unmodified ones for reducing water absorption.

Authors: 

Matveeva L. Yu. Saint Petersburg State University of Architecture and Civil Engineering St. Petersburg, Russia

Kostrikin M. P. Saint Petersburg State University of Architecture and Civil Engineering St. Petersburg, Russia

Tarasova E. E. Saint Petersburg State University of Architecture and Civil Engineering St. Petersburg, Russia

Voznyakovsky A. P. S. V. Lebedev institute of Synthetic Rubber St. Petersburg, Russia

Neverovskaya A. Yu. S. V. Lebedev institute of Synthetic Rubber St. Petersburg, Russia

Otvalko J. A. S. V. Lebedev institute of Synthetic Rubber St. Petersburg, Russia

Journal Issue